Ubiquiti UniFi Switch Flex (USW‑Flex, 46 W)

Description UniFi Switch Flex (USW‑Flex, 46 W) The Ubiquiti UniFi Switch Flex (USW‑Flex) is a rugged, compact Layer 2 Gigabit Ethernet switch designed for flexible deployment in both indoor and outdoor environments. It packs a single PoE input port and four PoE output ports into a small, IP55-rated enclosure. Powered via PoE , the Flex delivers up to 46 W total output, making it ideal for powering edge devices such as cameras, access points, sensors, or extending networks to remote nodes. �� Weather‑Resistant Design for Edge Deployments The USW‑Flex is built to endure temperature extremes and environmental exposure. With an operational range from –40 °C to 55 °C (when delivering up to 46 W of PoE), and up to –65 °C when outputting 25 W, it offers real-world resilience in diverse climates and high-stress conditions Although Ubiquiti labels it as “weather-resistant,” the device itself lacks an official IP ingress rating. Community users consistently recommend deploying the unit inside a proper weatherproof enclosure—such as the USW‑Flex Utility—to ensure protection from rain or prolonged exposure. As noted,: “This. Put it in a box if you can. Way less chance of weather damage…” For sheltered locations like covered porches or under eaves, many users have successfully installed the Flex directly without issues—but caution is advised for fully exposed mounting. �� PoE Powering Architecture Port 1: PoE input (supports 802.3af, 802.3at, or 802.3bt—PoE ). Power provided through this uplink enables maximum energy delivery to attached devices. Ports 2–5: Each supports 802.3af PoE output. Depending on input source, the switch can deliver: 46 W total when powered by PoE (BT mode), 20 W from PoE (AT mode), 8 W when powered via standard PoE (AF mode) Per-port limits are approximately 15.4 W on PoE , shared across the four output ports. If you need higher per-port wattage, ensure your upstream power injector or switch is PoE capable or supplement with a 60 W injector configured in the UniFi controller ⚙️ Compact Performance & Switching Capabilities Despite its small size, the USW‑Flex delivers serious network performance: 5× Auto-MDI/X Gigabit RJ45 ports: one for PoE input and four for PoE output Switching capacity: 10 Gbps aggregate (non-blocking), throughput up to 5 Gbps, forwarding rate ~7 Mpps Layer 2 features: VLAN support (up to 1,000), jumbo frames, flow control, port mirroring, port isolation, and egress rate limiting ESD/EMP protection of ±16 kV (air and contact) on all ports helps guard the unit in lightning-prone or industrial settings. Additionally, CE, FCC, IC, and NDAA compliance make it suitable for commercial and government installations �� Mechanical Design & Mounting Flexibility The small form factor—122.5 × 107.1 × 28.0 mm and weighing only ~230 g—enables discreet mounting in tight spaces. The unit offers versatile orientation: Wall mounting via built-in slots Pole mounting with included fasteners Magnetic mount option on steel or ferrous surfaces for quick deployment A weather seal cover hides the uplink port when not in use, improving protection against spray and dust. Cable fittings help minimize connector exposure. �� Unified Management with UniFi Controller UniFi Switch Flex (USW‑Flex) Managed through UniFi Network Controller (v5.10.3 or later) or UniFi mobile app, enabling central monitoring, configuration, and firmware updates UniFi Switch Flex (USW‑Flex) Features include traffic analytics with DPI, guest portals, VLAN configuration, and PoE state control per port Administrators can set PoE-off schedules, monitor power draw in real time, and assign PoE roles based on attached devices. ✅ Real‑World Applications Outdoor Wi-Fi & Access Points Mount the Flex near outdoor access points (e.g., UniFi AC Mesh), eliminating the need for long cable runs and simplifying deployment in yards, patios, or rooftops. Surveillance Camera Hub Power up to four cameras—like UniFi G4 Pro, G3 Flex, or other PoE cameras—from a single uplink. Ideal for vehicle gates, driveways, or camera clusters Temporary or Summer Installations Perfect for event setups, pop-up booths, or seasonal lighting systems where durable, flexible power & network provisioning is needed outdoors. Industrial and Campus Nodes Use as a small IoT / sensor hub in warehouses, outdoor patios, or utility meter areas where ruggedness and compact deployment matter. �� Short & Concise Specifications Feature Specification Dimensions 122.5 × 107.1 × 28.0 mm (4.82 × 4.22 × 1.10″) Weight ~230 g (8.11 oz) Ports 1× PoE In (802.3bt/at/af), 4× PoE Out (802.3af) Total PoE Budget Up to 46 W (PoE input), 20 W (PoE ), 8 W (PoE) Max Per-Port Output ~15.4 W (when limited by PoE ) Switch Throughput 5 Gbps (10 Gbps wire speed), 7 Mpps forwarding Layer 2 VLANs (1,000), Jumbo frames, port mirroring, etc. ESD/EMP Protection ±16 kV Air & Contact Operating Temp –40 °C to 55 °C (46 W), up to 65 °C at lower power Humidity 5–95% non‑condensing Certifications CE, FCC, IC, NDAA Mounting Options Wall, pole, or magnetic mount Management UniFi Network Controller / Mobile App Power Usage Idle ~5 W (excluding PoE output) �� Pros & Limitations Advantages Compact design with PoE input/output flexibility Rugged enough to install outdoors (with shelter or enclosure) Powerful enough to run multiple edge devices from one unit Full compatibility with UniFi controller for management and analytics Versatile mounting options including magnetic attachment Considerations No official IP rating; best used inside a weatherproof box in fully exposed conditions Power budget is shared—top ports may require PoE injector for full output Port count (4 output) may limit deployment in expanded clusters PoE injector is sold separately and must be configured via the controller �� Community & Field Feedback Reddit users consistently advise using a weatherproof enclosure if the switch is fully exposed: “I wouldn’t personally trust them for outdoor use… no IP rating… get a weatherproof junction box.” Still, some report stable long-term outdoor use without the box if sheltered: “Ours out in the weather within a utility box, two years running… if it won’t be exposed to moisture (splashes), you should be fine mounting as-is.” UniFi Switch Flex (USW‑Flex)  Despite mixed experiences, most professionals prefer to err on the side of protection—especially for rooftop or pole-mounted installations. ✅ Final Thoughts The UniFi Switch Flex (USW‑Flex) delivers powerful PoE distribution and Gigabit switching in a remarkably compact, cost-effective format. Its design addresses the needs of edge deployments—especially where cabling and network endpoints are dispersed or subject to environmental exposure. With a total 46 W PoE budget, small form factor, and support from Ubiquiti’s UniFi software stack, it’s a flexible and reliable tool for powering cameras, access points, sensors, and more. For fully exposed outdoor use, combining the switch with the UniFi Switch Flex (USW‑Flex)  is recommended to ensure protection and longevity. �� Links Official Product Page – Ubiquiti USW‑Flex (46 W)https://store.ui.com/us/en/products/usw-flex Intal Link – Radox Technology Limited (UniFi USW‑Flex)