FEATURES: Powered directly from the USB port with no additional power supply needed Miniaturized single axis USB stick controller for micro-positioning Designed for use with the National Apperture MM-1M series miniature linear stages, and other low voltage servo motors. Its intended use is for motors up to 4.5 V DC with maximum 200 mA current drain. Specifications: Dimensions (mm): 51 x 19 x 10 Control Loops: P-term, I-term, D-term Parameters Control: Position, Velocity, Acceleration, and Torque Computer Interface: Standard USB Resolution: Down to 0.004 µm depending upon the encoder used Networkable: Optionally Inputs and Outputs: Digital and analog inputs and outputs for conversions and data acquisition.Maximum motor drive voltage is 4.5 V. Power Requirements: No external power needed, use 5 V USB BUS Software: Visual Basic™, LabVIEW™ Drivers and DEMO Sotware (all included) Plug and Go Just plug it in to the USB port on your computer The information contained on this website is subject to change without notice. Critical dimensions or specifications should be verified with our technical support staff.
