This small package contains not only a single-axis motion controller for use with our motorized stages, but also an amplifier and a user-friendly Serial Interface. Each single-axis controller can be linked to multiple Control Units for an integrated multi-axis Motion Control system. Your purchase will include an easy to use Software Application Development Interface, and an RS-232 serial cable. The MC-CQ is RoHS and CE compliant. When combined with National Aperture’s “IMS Motion Console Software” users receive a “No-development-required” complete Motion Control system for up to four axes. FEATURES RoHS Compliant CE Marked Integrated Controller and Amplifier Small footprint Easy to use RS-232 Serial Interface Linkable to multiple Control Units Single-Axis becomes Multi-Axis Includes Software Application Development Interface DC power input with secure lock-on connection Easy access fuse Front access ON/OFF power switch Controller provides Velocity and Position Mode closed-loop control w/programmable speed and acceleration and a rich Command-Set Clean-and-Simple-Connectivity facilitates Rapid Development Optional 2, 4, 8 or 16 port USB to RS-232 Expansion Module (Plug ‘n Play) Specifications Supply Voltage: 12-30 Vdc PWM Switching Frequency: 78.12 Khz Efficiency: 95% Max Continuous Motor Current: 6 A with sufficient conductors for motor connection 1A with 28 gauge ribbon cable Max Peak Motor Current: 10 A with sufficient conductors for motor connection and sufficient power supply current. 2 A with 28 gauge ribbon cable. Controller Current Consumption: 60 mA (w/no Motor, Encoder, or Limit Switch Current) 5 Volt Outputs: 50 mA (Max Combined Load from Encoder Vcc and Limit Vcc) Limit Switch Configuration: Switches to ground expected (Controller incorporates 1 K pull-up resistors to 5 V. Limit Switch Logic Levels: Low 0-0.5 V, High 4.0-5.0 V Encoder Input Logic Levels: Low 0-0.5 V, High 400 Hz Encoder Input Max Frequency: 400 Hz Maximum Motor Velocity: 30,000 rpm (do not exceed stage speed rating) Baud Rate: 600, 1200, 2400, 4800, 9600, 19,200, 38,400, 57,600, 115,200 Serial EEPROM Program Memory: 6656 Bytes Operating Temperature: 0 to 70°C Storage Temperature: -25 to 85°C The information contained on this website is subject to change without notice. Critical dimensions or specifications should be verified with our technical support staff.
