Precise USB3.0 device combining the functionality of autocollimator, alignment telescope with laser beam profiling capability. The system measures minute angular displacements for various optical setups and can align a laser beam to the optical axis or mechanical axes, as well as laser beam divergence analysis. The system offers portable, compact and accurate beam alignment solution. Our precision electronic autocollimator has built in adjustment features, such as leveling bubble, adjustment pan tilt knobs enhancing the unprecedented alignment procedures (between the laser, the optical and mechanical axis of the device). Specifications Laser Type CW & Pulsed FoV Autocollimator ±40’ (H) x ±25’ (V) FoV Telescope & Beam Profiler ±1°20’ (H) x ±50’ (V) Clear Aperture 36 mm Autocollimator’s Resolution 0.01 sec Autocollimator’s Accuracy 1.0 sec Light Source LED- 650, optional: 1060. Special order: 1310 nm Retro-reflector for alignment ⌀64 mm, N.W 280 g Thread ⌀16 mm, <5” Beam Divergence Measurements Down to 0.2 mRad or better Line of Sight Retention as Function of Focusing /- 2.5 seconds Min. Focusing Distance Less than 17.5 cm Built in coarse aiming Laser Pointer 638 nm power <1.0 mW Class 2 laser product, IEC60825-1 Beam width resolution Better than 2.5 μrad Spectral Response 350 – 1310 nm (Telescope Mode) VIS 400-700 nm, NIR User specified Resolution (H x V pixels) 1920 x 1200 Gain Control x24 Dynamic Range 60 dB , 12 bit Exposure Speed 39 µsec to 20 sec Frame Rate 40 fps (8 bit) 30 fps (12 bit) Beam divergence accuracy ±2% Position resolution of laser beam Better than 2.5 μrad Pixel Size 5.86 µm x 5.86 µm Background Subtraction User activated Trigger • Internal Software • Hardware Falling or Rising Edge • Trigger Delay 0.015ms – 4.0 sec Power Requirements ~2 Watt (Via USB 3.0 interface) Dimensions (L x W x H) 240 x 154 x 190 mm Weight (typical) 3 kg including cable Interface USB 3.0, Windows 10 (32 & 64 bit) Operating Temperature 0°– 35°C Ordering Information EAC-1012-L19: Complete system including a collimator unit with USB3.0 CCD camera, built-in 5xND filters on a slider, software on CD, and a retro-reflector for infinity adjustment.
