The system is capable of measuring up to 3 beams simultaneously, both CW and pulsed beams. Offering a wide range of spectral response, from deep UV, VIS and up to 1550nm. High accuracy measurement – less than 5um deviation edge-to-edge. It is a USB3.0 based device, with data exporting capabilities to another computer via RS232, data logging and detailed statistics, SDK control for integration in user application programs. Ordering Information The system comes with a camera, a set of 2X NG10 filters in housing, a mounting post, USB attachment, software on CD disk, carrying case. SPOTCCD-VIS-USB: System with USB interface, camera for VIS range 350-1100nm SPOTCCD-UV-USB: System with USB interface, camera for UV range 190-1100nm SPOTCCD-IR1310-USB:System with USB interface, camera for 350-1310nm SPOTCCD-IR1550-USB: System with USB interface, camera for IR range 1550±50nm (*)Based on a standard CCD for VIS, coated with a phosphor coating, enabling capture of signals at the 1550±50nm range. Accessories NG10 Filter: NG10 filter in housing (3/4” – 32 thread), filter width 1.6mm ±0.1mm Specifications Beam size range ∅50 μm – ∅5 mm Spectral Response 350 – 1310 nm Sensor Resolution 1280 x 1024 Optical dynamic range Up to 1011 using all filters and software controlled electronic shutter and gain Sensitivity ~0.5 nW/cm² @ 633 nm ~15,000 nW/cm²@ 1310 nm (15 μW/cm²) Saturation ~1mW/cm², no filters Power measuring With user’s pre-calibration at a selected point Dimensions ∅63 mm x 51 mm deep Environment Operating Temperature 0° – 35° C Weight 300 gr with cable Filters NG-4, NG-9, NG-10 Interface USB 3.0 Sensor type 1/1.8″ format Sensor active area 6.78 (w) x 5.4 (h) mm (diagonal 8.7 mm) Pixel size 5.3 μm (H) x 5.3 μm (V) Shutter speed 9 – 200,000 μsec Damage threshold 50 W/cm² with filters Maximum frame rate Over 50 Hz Null In CW mode, null function is available to automatically subtract background Operation with pulsed lasers Ability to capture and replay pictures and statistics from a slowly pulsing laser (1-100 Hz) while filtering out frames with no laser pulse. Gain control and external filters make it easy to obtain optimum intensity Trigger – Hardware Falling Edge – Hardware Rising Edge – Enable/Disable Trigger Delay – Trigger Delay 0.015ms – 4.0 sec
