High precision beam diagnostics for CW lasers. A wide spectral range from deep UV through 2700nm. Wide dynamic range, beam size measurements down to 2 µm size and up to 10mm with 0.1 µm resolution. The new USB version offers enhanced operation of the BeamAnalyzer series, including: USB 2.0 interface, 12 bit device, high resolution sampling for all blades simultaneously, Windows 7 32 & 64 bit OS. Data streaming via TCP/IP communication protocol or RS232. ActiveX software for integration in customer’s application program is available. The system is composed of an external USB 2.0 box, a measuring head, a set of 2xNG Schott colored filters (NG4, NG9) in housing for Si and UV-Si detectors, a mounting post, Windows application software on CD disk, carrying case. Note: The product is also available with an older PCI interface (OS supported Windows XP/2000), 8 bit A/D card Specifications Sensor type Silicone(Si) UV-Silicon (UV-Si) InGaAs(IR) InGaAs Enhanced(IRE) Spectral range Si 350~1100nm Uv-Si 190~1100nm IR 800~1800nm IRE 1200~2700nm Number of blades 3 for BA3 heads 7 for BA7 heads Beam size range BA3-Si and BA3-UV 3um~5mm BA7-si and BA7-UV(Oval) 15um~10mm BA7-Si and BA7-UV(Round) 15um~9mm BA3-IR3 and BA3-IR3-E 3um~3mm BA7-IR3 and BA7-IR3-E 15um~3mm BA3-IR5 3um~5mm BA7-IR5 15um~5mm Beamwidth resolution For beams＞100um in size 1um For beams＜100um in size 0.1um Beamwidth accuracy ±2% Power range For Si and UV-Si heads 10uW to 1W with filters For InGaAs heads 10uW to 5mW(no filters) Power accuracy Si and Uv-Si heads ±5% InGaAs heads ±10% Power resolution 0.1uW Position resolution 1um Position accuracy ±15um Saturation Si and Uv-Si heads 0.1W/cm2 without filter 20W/cm2 with NG9 Power resolution 0.1uW Measurement rate 5Hz weight Sensor head 755gr with cable,manifold box 350gr Operating Temperature 0℃~35℃ Pc interface USB2.0(PCI optional) BeamAnalyzer USB2.0-Optional Accessories SAM3-B Beam Sampler,with mounting adapter sampling reduction factor 0.0016 average BA-Fiber A fiber adapter with an FC connecter BA-Mount A mount enabling head rotation about the optical axis Ordering Information Complete system including a measuring head with 2.5m long attached cable,a mounting post, a USB2.0 manifold box, software and user manual on CD,carrying case. NG4 and NG9 filters in housing are provided for the Si and UV-Si heads only. BA3-Si-USB: 3-blades, Si detector 5mm circular BA7-Si-USB: 7-blades, Si detector 9mm square BA3-UV-USB: 3-blades, UV-Si detector 5mm circular BA7-UV-USB: 7-blades, UV-Si detector 9mm circular BA3-IR3-USB: 3-blades, InGaAs detector 3mm circular BA3-IR3E-USB: 3-blades,InGaAs Enhanced 3mm circular BA7-IR3-USB: 7-blades, InGaAs detector 3mm circular BA7-IR3E-USB: 7-blades, InGaAs Enhanced 3mm circular BA3-IR5-USB: 3-blades, InGaAs detector 5mm circular BA7-IR5-USB: 7-blades, InGaAs detector 5mm circular Optional accessories SAM3-B Beam Sampler: with mounting adapter Sampling reduction factor 0.0016 average BA-Fiber: A fiber adapter with an FC connector BA-Mount: A mount enabling head rotation about the optical axis
