A complete system for Laser Beam Analysis, composed of a 2/3″ CCD camera head, a set of 3 colored filters (ND8,2xN16) in housing, a USB 2.0 attachment, software on CD disk, carrying case. The BeamOn 2/3″ CCD system is a beam diagnostics measurement system for real-time measurement of continuous or pulsed laser beams. Its 2/3″ CCD sensor allows it to cover a larger beam size with an active area of 8.5mmX6.35mm, and pixel size of 11.6µmx11.2µm. It measures laser beam parameters, such as: beam width, shape, position, power, and intensity profiles. The BeamOn 2/3 is USB software driven device, which can be connected to a Notebook (or Desktop) computer via the High Speed USB 2.0 port run on Windows XP/2000/7/8/10 (32 & 64 bit) platforms. Specifications Parameters Value Camera type Monochrome interline transfer CCD 2/3″format Spectral range 350~1100nm Sensor active area 8.5mm×6.35mm Pixel size 11.6um×11.2um S/N Ratio 58dB Sensitivity ~40 nW/cm2 at 633nm Saturation intensity 50W/cm2 or 1J/cm2 with all filters installed Handing of pulse Abillty to capture and replay image from slowly pulsing laser(1~100Hz)while filtering out frames with no laser pulse.Gain control and external filter make it easy to abtain optimal intensity Trigger In pulsed mode,sliding bae control allows setting of threshold so as to display only frames with captured pulse. Shutter speed 1/50s(“Off”) to 1/100000 sec,8 steps manually,or automatic Frame rate 25Hz Dimensions 60mm(L)×45mm(W)×40mm(H) Weight 120 gr.without cable(320 gr. With cable) Operating temperature 10℃ to 50℃ Operating systems Windows XP/2000/7 32&64 bit PC interface USB 2.0 attachment Ordering Information BeamOn2/3 The system comes with a camera, a post, a set of 3xND colored filters (ND8, 2xN16) in housing, a USB2.0 attachment, software on CD disk, carrying case. Additional accessories SAM1: Beam sampler (ratio 3X10^(-3)) SAM2: Beam sampler (ratio 1X10^(-6))
