The BeamOn LA system is a beam diagnostics measurement system for real-time measurement of continuous or pulsed Large Laser beams. It measures laser beam parameters, such as: intensity profiles, beam width, shape, position and power. Software also provides report function for beam analysis settings and results. The system is based on a USB interface, software driven device, which can be connected to a Notebook (or Desktop) computer via the High Speed USB 2.0 port and run on Windows 7 / 8 / 10 OS (32 & 64 bit). Specifications Parameters Value Spectral range VIS-NIR 350~1310nm Power level Up to 100 J/cm2(or 100W/cm2) Max frame rate 25Hz Image Resolution 720×576 Shutter speed 1/50 to 1/100000 sec,9 steps Gain control 6dB to 60dB,16 steps Null In CW Null mode function is available to automatically subtractgound back Optiacl dynamic range Up to 1×1010 using ND 1000 filter and softwarecontrolled electronic shutter and gain Damage threshold 100 J/cm2(or up to 200W/cm2) Sensitivity 0.1 uW/cm2 at 633nm (VIS-NIR) Saturation 100 W/cm2 with ND1000 filter Operation with pulsed lasers Abillty to capture and replay image from slowly pulsing laser(1~100Hz)while filtering out frames with no laser pulse.Gain control and external filter make it easy to abtain optimal intensity Triggering I pulsed modest threshold by slide bar to display frames with captures pulse Minimal beam size 5mm diameter Sensor active area 58mm×45mm Sensor weight 1.1kg with cable Power consumption 2.6 Watts throughusb 2.0 port Ordering Information The system comes with sensor head, a built-in filter slider with a set of 5xND filters (ND8, ND64, ND200, ND400 and ND1000), USB2.0 attachment, software and user manual on CD disk / DiskOnKey, carrying case. BeamOn LA VIS-NIR: for spectral range 350-1310nm BeamOn LA UV-NIR: optional, consult factory
