Precise USB3.0 device combining the functionality of autocollimator and alignment telescope. The Autocollimator enables high precision measurement of angular reflections from mirror surfaces. Our precise Electronic Autocollimator has high resolution measurement capability down to 0.01 arc sec or 0.05 µrad, with clear aperture of 62 mm. Newly introduced IR versions featuring 1060 & 1310 nm wavelengths, with USB 3.0 interface, offering unique IR compatible Autocollimators. Specifications FoV Autocollimator ±19’ (H) x ± 12.5’ (V) FoV Telescope & Beam Profiler ±38’ (H) x ± 25’ (V) Clear Aperture 62 mm Autocollimator’s Resolution 0.01 sec Autocollimator’s Accuracy 1.0 sec Light Source LED- 650, optional: 1060, RGB. Special order: 1310 nm Retro-reflector for alignment ⌀64 mm, N.W 280 g Thread ⌀16 mm, <5” Min. Focusing Distance Focused at Infinity Built in coarse aiming Laser Pointer 638 nm power <1.0 mW Class 2 laser product, IEC60825-1 Spectral Response 350 – 1310 nm (Telescope Mode) Resolution (H x V pixels) 1920 x 1200 Gain Control x24 Dynamic Range 60 dB , 12 bit Exposure Speed 39 µsec to 20 sec Frame Rate 40 fps (8 bit) 30 fps (12 bit) Pixel Size 5.86 µm x 5.86 µm Pixel Bit Depth 8/12 bits Background Subtraction User activated Objective Aperture M72 x 0.75 mm Trigger • Internal Software • Hardware Falling or Rising Edge • Trigger Delay 0.015ms – 4.0 sec Pan & Tilt knobs Tilt ±2°, Pan ±2.5° Power Requirements ~2 Watt (Via USB 3.0 interface) Dimensions (L x W x H) in mm 443 x 92 x 160 Weight (typical) 5 kg Min. Hardware Requirements CPU i3 1.6 GHz, 4 GB RAM Min. Resolution 1366 x 766 Interface USB 3.0, Windows 7/8/10 (32 & 64 bit) Operating Temperature 0°– 35° C Ordering Information EAC-HR: Complete system including a collimator unit with USB3.0 CCD camera, software on CD/Flash and a retro-reflector for infinity adjustment.
